The use of the dental compressor allows all your equipment to work with quality, from the engines to the suckers and jets. For its installation to be carried out, you must plan a specific place for it, where its noise does not disturb your routine or your patient.
Installation should not be done near restrooms, waste, such as garbage, due to the risk of contamination, or in environments that require silence. It would be best if you separated a well-ventilated environment, protected from rain and dust. They last longer and are not contaminated by any agent that could make the air compressed by it inappropriate.
When choosing a compressor model, prefer those models that do not work on oil because, with unregulated equipment, the oil can contaminate the air and even damage the other equipment in your office.
Maintenance And Security
All equipment used for any health treatment must be rigorously cleaned and have their maintenance always up to date.
When you purchase dental care equipment, including your compressor, carefully read its instruction manual to make sure you know the optimal frequency of maintenance and how to do it.
As for cleaning, it must be done daily to maintain a safe environment for your patient and have a piece of more durable equipment.
To clean properly, use neuro detergent and water and do not use any flammable or corrosive cleaning supplies.
When Opening The Dental Office
At the beginning of each day of appointments in your office, make the following checks on your compressor to avoid problems throughout your routine:
- Turn on the equipment and check if your compressor is working correctly;
- Observe if there is any leakage, air or water, even with the drain closed;
- Open the drain and empty the water and air tank;
- Check again for any leakage;
- Make sure the air outlet is fully open and locked in the open position.
At The Closing Of The Clinic
When your service day is over, it’s time to recheck your compressor. Make your checklist:
- Turn off your compressor by turning on the power switch;
- Clean the compressor using a cloth dampened with detergent;
- Release the air in the tank by unlocking the drain;
- Also, open the drain of the filters.
This equipment through custom metal fabrications for medical industry aims to facilitate the professional’s daily life and add value to the office. The intraoral camera allows the patient to understand their situation and the urgency of solving their problem, starting treatment as soon as possible. It can take photos and complement the patient’s documentation.